-33%
Electric Water Heating Rod 1500 W (1000/1200/1500 W)
Rs.599Rs.899
Water Heating Rods
No gas, weak geyser or no geyser at all? An electric water heating rod (immersion rod) heats a bucket of water for a bath in minutes. Choose a classic 1,000–1,500 W rod or the stronger NSG F8 2,000 W with overheat protection.
-33%
-36%
NSG F8 Water Heating Rod 2000 W with Overheat Protection
Rs.899Rs.1,399
Water Heating Rods: how to choose the right one
In short
- A water heating rod is a metal heating coil you put into a plastic bucket of water, then plug in.
- A 1,500–2,000 W rod heats a normal bucket in roughly 15–30 minutes.
- Rule no. 1: rod in first, then plug in; unplug first, then take out. Never touch the water while it is on.
- Standard rods cost Rs 350–700; F8-type 2,000 W rods Rs 500–1,200.
- A 2,000 W rod uses 2 units an hour — about 0.5–0.7 units for one bucket.
The low-cost answer to winter gas shortages
In many Pakistani cities gas pressure drops sharply in December and January, exactly when hot water matters most. An immersion rod is the simplest backup: no installation, no plumbing, and it fits in a drawer when not in use.
It is also the go-to for hostels, rented rooms, shops and village homes. Used properly — plastic bucket, correct water level, unplugged before touching — it is a safe, practical tool used by millions of families.
Our water heating rods
Rod wattage and heating time
| Rod | Units per hour | Approx. time for one bucket |
|---|---|---|
| 1,000 W | 1.0 | 25–40 min |
| 1,500 W | 1.5 | 20–30 min |
| 2,000 W (F8) | 2.0 | 15–25 min |
Times depend on how much water and how cold it is. See the water heating rod guide.
Safe use, every time
- Plastic bucket onlyNever a metal bucket.
- Rod in firstHang the rod so the coil is under water, between the marks.
- Then plug inEarthed wall socket, dry hands.
- Hands offDo not touch the water or bucket while it is on.
- Unplug, then removeSwitch off and unplug before taking the rod out.
Never do this
- Never switch a rod on in air — it burns out in seconds.
- Never leave it unattended or within reach of children.
- Never touch the water while plugged in, even if the box says "shockproof".
Cash on deliveryPay the rider when it arrives
Free deliveryOn orders over Rs 3,000
Checked before dispatchEvery heater switched on
7-day replacementIf it arrives faulty
Keep reading
01What is the price of a water heating rod in Pakistan?
Standard 1,000–1,500 W rods cost about Rs 350 to Rs 700; F8-type 2,000 W rods about Rs 500 to Rs 1,200.
02How long does a heating rod take?
Roughly 15–30 minutes for a normal bucket, depending on wattage and water temperature.
03Is a water heating rod safe?
Yes, if used correctly: plastic bucket, rod in before plugging in, unplug before touching the water, never leave it unattended.
04What is an F8 rod?
A popular style of 2,000 W rod with a sealed head and overheat protection.
05How much electricity does it use?
A 2,000 W rod uses 2 units an hour — about 0.5–0.7 units per bucket.
06Is cash on delivery available?
Yes.